Tags: banana, pi, bpi-uno32, sbc, single, board, computer, bpi-uno32, sbc, boards

Banana PI BPI-UNO32 SBC Single Board Computer

  • ¥101
  • The BPI: UNO32 (also referred to as BPI-UNO32, stylized as BPI UNO32) is an ESP32 with Xtensa 32bit LX6 single/dual-core processor-based embedded system. support Webduino, Arduino, Micropython, Scratch. X function.

    BPI-UNO32 uses the ESP-WROOM-32 of Espressif Company as MCU. ESP32 is a single-chip solution integrating 2.4GHz Wi-Fi and Bluetooth dual mode. The 40-nanometer technology of TSMC has the best power consumption, RF performance, stability, versatility, and reliability. It can deal with various application scenarios.

    Two separate controlled CPU cores, the main frequency can be up to 240MHz, 448KB ROM, 520KB SRAM.

    BPI-UNO32 The appearance size is fully matched with Arduino UNO R3

    BPI: UNO32 Specs

    Hardware spec
    CPUXtensa® 32-bitLX6single / dual-core processor
    ROM448KB
    SRAM520KB
    Flash4MB(Onboard),A maximum of 4 Flash/SRAM, each Flash maximum 16MB
    Power[email protected] 5.5mm 12VDCport
    GPIO12-bits SAR ADC 18 channel, 2\*8-bit D/A converter, 4*SPI, 2*I2S, 2*I2C, 3*UART, Host SD/eMMC/SDIO, Slave SDIO/SPI
    Wi-Fi802.11 b/g/n/e/i 802.11 n\(2.4GHz 150Mbps\) 802.11 e\(Quality of Service\)
    BluetoothBT4.2 & BLE
    BuzzerPassive buzzer
    LEDsRGB LED/POWER LED/Receive LED/Transmit LED
    Sizes68mm\*53mm


    • 2 or more ¥90
    • 4 or more ¥84
    • Brand: Banana PI
    • Product Code: bpi-uno32
    • Availability: 215

    The BPI: UNO32 (also referred to as BPI-UNO32, stylized as BPI UNO32) is an ESP32 with Xtensa 32bit LX6 single/dual-core processor-based embedded system. support Webduino, Arduino, Micropython, Scratch. X function.

    BPI-UNO32 uses the ESP-WROOM-32 of Espressif Company as MCU. ESP32 is a single-chip solution integrating 2.4GHz Wi-Fi and Bluetooth dual mode. The 40-nanometer technology of TSMC has the best power consumption, RF performance, stability, versatility, and reliability. It can deal with various application scenarios.

    Two separate controlled CPU cores, the main frequency can be up to 240MHz, 448KB ROM, 520KB SRAM.

    BPI-UNO32 The appearance size is fully matched with Arduino UNO R3

    BPI: UNO32 Specs

    Hardware spec
    CPUXtensa® 32-bitLX6single / dual-core processor
    ROM448KB
    SRAM520KB
    Flash4MB(Onboard),A maximum of 4 Flash/SRAM, each Flash maximum 16MB
    Power[email protected] 5.5mm 12VDCport
    GPIO12-bits SAR ADC 18 channel, 2\*8-bit D/A converter, 4*SPI, 2*I2S, 2*I2C, 3*UART, Host SD/eMMC/SDIO, Slave SDIO/SPI
    Wi-Fi802.11 b/g/n/e/i 802.11 n\(2.4GHz 150Mbps\) 802.11 e\(Quality of Service\)
    BluetoothBT4.2 & BLE
    BuzzerPassive buzzer
    LEDsRGB LED/POWER LED/Receive LED/Transmit LED
    Sizes68mm\*53mm

    Write a review

    Note: HTML is not translated!
        Bad           Good