Tags: bpi-mt7615, 802, 11, ac, wifi, 4x4, dual-band, module, based, on, mtk, mt7615, chip, design, support, banana, pi, r2, and, r64, router, bpi-mt7615, sbc, boards

BPI-MT7615 802.11 Ac WiFi 4x4 Dual-Band Module Based on MTK MT7615 Chip Design, Support Banana Pi R2, and R64 Router

  • ¥268
  • BPI-MT7615 802.11 Ac WiFi 4x4 Dual-Band Module Based on MTK MT7615 Chip Design, Support Banana Pi R2, and R64 Router

    About this item

    Reliable WiFi chip MT7615 is a highly integrated Wi-Fi single chip that supports a 1733 Mbps PHY rate, It fully complies with IEEE 802.11ac and IEEE802.11 a/b/n standards, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance

    Low Power Consumption Optimized RF architecture and baseband algorithms provide superb performance and low power consumption. Intelligent MAC design deploys a high efficient offload engine and hardware data processing accelerators which completely offloads Wi-Fi task of the host processor

    Professional Design MT7615 is designed to support standard-based features in the areas of the host processor.MT7615 is designed to support standard-based features in the areas of security quality of service and international regulations. giving end users the greatest performance any time and in any circumstance

    Dual-Band WiFi Support MT7615 supports concurrent dual-band operation at 5GHz and 2.4GHz band(DBDC, Dual-Band-Dual-Concurrent.It enables diversified applications that require one link at 2.4GHz band, and the other at less crowded 5GHz band simultaneously

    AP Mode With the advent of 802.11ac, multiuser MIMO(MU-MIMO) is defined. Mt7615 supports MU-MIMO with different configurations. An AP is able to use its antenna arrays to transmit multiple frames to different clients at the same time and over the same frequency spectrum

    Product description

    Features

    Support 4x4 4SS 11ac wave2 MU-MIMO and 160MHz channels

    Mu-MIMO configurations of-4 Users:4*1SS

    -3 users:2*1ss+1*2ss or 3*1ss

    -2 users:2*2ss or 1*1ss+1*2ss or 2*1ss

    support 5,10,20,40,80,80+80,and 160MHz channels

    Embedded ARM cortex R4 processor for full host CPU offload.

    Embedded 32-bit RISC microprocessor.

    iNIC Gen2 with full Wi-Fi offload

    Highly integrated RF with 40nm low power process.

    4T4R with support of up to 1733Mbps PHY rate.

    Configurable 4x4/3x3 or 2x2n+2x2ac DBDC

    Noise mitigation:-Supports background scan function for fast channel switching.

    -Supports spectrum analysis for non-Wi-Fi signals

    Intelligent power saving

    Hardware-based Airtime Fairness(QoS)

    Integrate high efficiency internal 2.4G/5G PAs

    Intelligent Calibration(iCal)reduces the production time

    Supports external PA/LNA/TRSW design

    WLAN via GPIO(client mode), supports Host Sleep(AP mode)

    Compact 12mm*12mm DRQFN118 package with PCIe Gen2 interface.Compatible with BPI R2 and R64 Board



    • 2 or more ¥257
    • 4 or more ¥250
    • Brand: Banana PI
    • Product Code: bpi-mt7615
    • Availability: Out Of Stock

    BPI-MT7615 802.11 Ac WiFi 4x4 Dual-Band Module Based on MTK MT7615 Chip Design, Support Banana Pi R2, and R64 Router

    About this item

    Reliable WiFi chip MT7615 is a highly integrated Wi-Fi single chip that supports a 1733 Mbps PHY rate, It fully complies with IEEE 802.11ac and IEEE802.11 a/b/n standards, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance

    Low Power Consumption Optimized RF architecture and baseband algorithms provide superb performance and low power consumption. Intelligent MAC design deploys a high efficient offload engine and hardware data processing accelerators which completely offloads Wi-Fi task of the host processor

    Professional Design MT7615 is designed to support standard-based features in the areas of the host processor.MT7615 is designed to support standard-based features in the areas of security quality of service and international regulations. giving end users the greatest performance any time and in any circumstance

    Dual-Band WiFi Support MT7615 supports concurrent dual-band operation at 5GHz and 2.4GHz band(DBDC, Dual-Band-Dual-Concurrent.It enables diversified applications that require one link at 2.4GHz band, and the other at less crowded 5GHz band simultaneously

    AP Mode With the advent of 802.11ac, multiuser MIMO(MU-MIMO) is defined. Mt7615 supports MU-MIMO with different configurations. An AP is able to use its antenna arrays to transmit multiple frames to different clients at the same time and over the same frequency spectrum

    Product description

    Features

    Support 4x4 4SS 11ac wave2 MU-MIMO and 160MHz channels

    Mu-MIMO configurations of-4 Users:4*1SS

    -3 users:2*1ss+1*2ss or 3*1ss

    -2 users:2*2ss or 1*1ss+1*2ss or 2*1ss

    support 5,10,20,40,80,80+80,and 160MHz channels

    Embedded ARM cortex R4 processor for full host CPU offload.

    Embedded 32-bit RISC microprocessor.

    iNIC Gen2 with full Wi-Fi offload

    Highly integrated RF with 40nm low power process.

    4T4R with support of up to 1733Mbps PHY rate.

    Configurable 4x4/3x3 or 2x2n+2x2ac DBDC

    Noise mitigation:-Supports background scan function for fast channel switching.

    -Supports spectrum analysis for non-Wi-Fi signals

    Intelligent power saving

    Hardware-based Airtime Fairness(QoS)

    Integrate high efficiency internal 2.4G/5G PAs

    Intelligent Calibration(iCal)reduces the production time

    Supports external PA/LNA/TRSW design

    WLAN via GPIO(client mode), supports Host Sleep(AP mode)

    Compact 12mm*12mm DRQFN118 package with PCIe Gen2 interface.Compatible with BPI R2 and R64 Board


    Write a review

    Note: HTML is not translated!
        Bad           Good