Orange Pi PC Plus AllWinner H3 1GB DDR3 A7 Quad Core 1.3GHZ, Open Source Single Board Computer
$47.32
- Brand: Orange Pi
- Product Code: opi-pc-plus
- Availability: In Stock
- Ex Tax: $47.32
-
- 2 or more $45.68
- 4 or more $43.89
Orange Pi PC Plus AllWinner H3 1GB DDR3 A7 Quad Core 1.3GHZ, Open Source Single Board Computer
About this item
High-Performance Chip: The Orange Pi PC Plus development board adopts the Allwinner H3 SoC with a Quad-core Cortex-A7 high-performance processor. It has 1GB LPDDR3 SDRAM and built-in 8GB eMMC Flash. The board integrates 100M Ethernet, DC power input, video/audio output, USB port, and TF card. It can also run an Android 4.4, Ubuntu, or Debian image.
More Powerful Compatibility: Orange Pi PC Plus is an open-source signal board computer that references quite rich interfaces, including HDMI, Ethernet, USB-Host, USB-OTG, DVP camera, etc. It integrates an onboard network, onboard storage, and an LED indicator. Our development board is compatible with the Raspberry Pi GPIO port and has a unique debugging serial port, etc.
SUPPORT OPEN-SOURCE: Orange Pi Pi PC Plus single board computers can build computers, wireless servers, games, music sounds, video and speakers, and pretty much anything else.can build computers, wireless servers, games, music sounds, video and speakers, and much more.
Hardware Specification
CPU: H3 Quad-core Cortex-A7 H.265/HEVC 4K
GPU: ·Mali400MP2 GPU @600MHz ·Supports OpenGL ES 2.0 Memory (SDRAM): 1GB DDR3 (shared with GPU)
Onboard Storage: TF card (Max. 32GB) / MMC card slot, 8GB EMMC Flash
Onboard Network: 10/100 Ethernet RJ45
Video Input: A CSI input connector Camera: Supports 8-bit YUV422 CMOS sensor interface, Supports CCIR656 protocol for NTSC and PAL, Supports SM pixel camera sensor, Supports video capture solution up to 1080p@30fps
Audio Input: MIC
Video Outputs: Supports HDMI output with HDCP, Supports HDMI CEC, Supports HDMI 30 function, Integrated CVBS, Supports simultaneous output of HDMI and CVBS
Audio Output: 3.5 mm Jack and HDMI
Power Source: DC input, USB OTG input don't supply power
USB 2.0 Ports: Three USB 2.0 HOST, one USB 2.0 OTG
Buttons: Power button
Low-level peripherals: 40 Pins Header
GPIO(1x3) pin: UART, ground.
LED: Power led & Status led Key: IR input, POWER Supported OS: Android Lubuntu, Debian Image Product size: 85mm × 55mm Weight: 70g
